MBR - STP Price

MBR Membrane Modules & SUF – Capacity Guide (10 KLD → 100 KLD) | RRR ENVIRO SYSTEMS

Why MBR / SUF Modules?

Membrane Bio-Reactors (MBR) combined with Submerged Ultra Filtration (SUF) modules deliver extremely fine solid-liquid separation (pore size ~0.06 µm), high-quality permeate & compact footprint. Ideal for reuse, ZLD pre-treatment, and tertiary polishing after conventional ETP/STP.

Capacity-wise Module Table (datasheet)

Table below is adapted from Memtrix SUF module datasheet you provided. For images & full P&ID see the P&ID section.

Capacity (KLD)	No. of cassettes (@10 m² each)	Size L×B×H (mm)	Weight (Kg)	Design flux (LMH)	Air scouring (m³/h)	Port size (Liquid/Air)	Stand MOC
10	3	310×640×1678	21	15–25	6.0	1" / 1.25"	SS304
20	6	580×640×1678	26	15–25	12.0	1" / 1.25"	SS304
30	8	750×640×1678	29	15–25	16.0	1" / 1.25"	SS304
40	11	1120×640×1678	36	15–25	22.0	1.25" / 1.5"	SS304
50	14	1300×640×1678	39	15–25	28.0	1.25" / 1.5"	SS304
60	17	1660×640×1678	45	15–25	32.0	1.25" / 1.5"	SS304
70	19	1840×640×1678	48	15–25	38.0	1.25" / 1.5"	SS304
80	22	1070×1256×1678	52	15–25	44.0	1.25" / 1.5"	SS304
90	25	1250×1256×1678	67	15–25	50.0	1.5" / 1.5"	SS304
100	28	1340×1256×1678	69	15–25	56.0	1.5" / 1.5"	SS304

Note: flux, air scouring and cassette counts are vendor datasheet values — final selection after pilot test & site-specific design.

10 KLD SUF Module — Quick Spec

Cassettes: 3 • Size: 310×640×1678 mm • Flux 15–25 LMH • Air 6 m³/h • Typical application: tertiary polishing for small STP/ETP.

Request Price

50 KLD SUF Module — Quick Spec

Cassettes: 14 • Size: 1300×640×1678 mm • Flux 15–25 LMH • Air 28 m³/h • Typical application: MBR plant & UF polishing.

Request Price

100 KLD SUF Module — Quick Spec

Cassettes: 28 • Size: 1340×1256×1678 mm • Flux 15–25 LMH • Air 56 m³/h • For larger MBR plants & industrial reuse.

Request Price

P&ID / Process Flow Diagram

Below place your P&ID images (upload in WordPress media and replace the src paths). The P&ID shows: EQR, ART/MBR reactor, suction/permeate lines, blowers, backwash & chemical dosing lines.

Tip: crop images to 1200px wide and upload to your media folder; the page will load faster.

Where to use MBR / SUF Modules

Municipal & apartment STP tertiary polishing (toilet flushing, gardening)
Industrial ETP polishing & ZLD RO pre-treatment
Hospitals, hotels, food processing for high quality reuse
Retrofit with existing aeration tanks + SUF module skid

Request Technical Proposal

Share: site location, required daily flow (KLD), raw influent BOD / TSS (if available) and any reuse requirement. We prepare GA, BOQ & performance guarantee after site visit or sample report.

FAQ

Q: How do I pick the right module for my plant?
A: Start with daily flow (KLD). Pick the capacity row that is ≥ your required KLD and review flux & air requirements. Contact us for pilot testing if feed is foul or high TSS/TDS.

Q: What is air scouring?
A: Continuous or intermittent air scouring prevents membrane fouling — datasheet gives typical air m³/h per module stack.

Q: Can MBR modules be backwashed/chemically cleaned?
A: Yes — the modules support routine backwash (timing per vendor) and periodic chemical cleaning (NaOCl) as per datasheet.